Road construction enclosure dust suppression and cooling spray machine, mixing station enclosure spray machine, construction site enclosure vertical spray equipment.

Road Construction Enclosure Dust Suppression and Cooling Spray Machine, Mixing Station Enclosure Spraying Machine, Construction Site Enclosure Vertical Spraying Equipment

The construction site enclosure spray wall mist system mainly consists of PPR water pipes, straight connectors, tees, elbows, and other components to form the water flow pipeline. The water tank provides the spray water source, the multi-stage pump supplies the transportation power, and the intelligent controller controls the entire system.

1. Intelligent Controller: Uses digital chip control, integrating upper and lower liquid level and pressure automatic control into one; offers three working modes: automatic, manual, and remote control; includes protection functions such as overload, no-load, phase loss, and ultra-low voltage; features a no-load restart function, adjustable from 1 to 240 minutes; has a fault memory function, allowing review of the last 5 fault causes; easy installation and simple debugging.

2. Multi-Stage Pump: Requires filling the pump with water before starting; must open the outlet valve during startup to reduce the motor's starting load and prevent motor burnout; when the pump's pressure decreases, the number of paper pads between the pump body and cover can be reduced; adjusting pressure too high may burn out the motor.

3. Water Tank: The water tank is equipped with an automatic water level control valve. When the water level in the tank is insufficient, the switch opens to automatically replenish the water source; when the water level reaches a certain height, the control valve automatically closes to stop water replenishment.

Enclosure Spray Wall Mist System Product Features

1. Uses digital chip control, integrating upper and lower liquid level and pressure automatic control into one

2. Offers two working modes: automatic and manual

3. Includes protection functions such as overload, no-load, phase loss, and ultra-low voltage

4. Features a no-load restart function, adjustable from 1 to 240 minutes

5. Has a fault memory function, allowing review of the last 5 fault causes

6. Easy installation and simple debugging

Equipment Parameters

Flow Rate: 6 m³/h

Head: 160 m

Power: 7.5 kW

Speed: 2900 r/min